AMVETS Jobs

Summary AMENDED TO EXTEND THE CLOSING DATE. These positions are being filled via Direct Hire Authority. Positions located in the Divisions of Operating Reactor Safety in Region I - King of Prussia, PA, Region II - Atlanta, GA, Region III - Lisle, Illinois and Region IV - Arlington, TX. These positions are in the Bargaining Unit with National Treasury Employees Union, Chapter 208. Positions are subject to security ownership restriction reporting requirements at the GG-12 and GG-13 grade level. Responsibilities The successful candidate will perform the full range of Project Engineer (Resident Inspector Development Program (RIDP)) duties. Such duties include, but are not limited to: Participating in formal classroom training and other developmental activities to gain full certification as an NRC Inspector. Participating in the assessment of licensee performance at nuclear facilities; you will perform direct inspections of licensee activities during operation phases. Planning, preparing, and performing in-depth inspections at assigned plant(s) during start-up, operation and decommissioning to ensure compliance with design specifications, and conditions of the operating license. Ensuring inspection program completion in accordance with schedules specified in the Inspection Manual or other official documents. Preparing and presenting inspection reports describing findings and conclusions regarding the licensee’s safety performance and conformance with NRC requirements, provisions of operating licenses, and applicable industry codes and standards. Assisting the Branch Chief or Senior Project Engineer in the handling of allegations and tracking the status of allegations. Selectees will be assigned to work in the Region I Office in King of Prussia, PA, the Region II Office in Atlanta, GA, the Region III Office in Lisle, IL or the Region IV Office in Arlington, TX based upon geographic preference indicated in their application. The selectees must become qualified through the NRC Inspection Manual Chapter (IMC) 1245 process within two years. Upon completion of training, developmental assignments, and Inspection Manual Chapter 1245 qualification process, selectees will be expected to seek reassignment from their regional office to a Resident Inspector position at one of the Resident Inspector Offices in their assigned Region. A list of the resident inspector offices in each region is included below. To learn more about our locations, visit the NRC website at NRC Locations. For additional information regarding the NRC Resident Inspector Program please view this video:https://www.youtube.com/watch?v=B8G9teoMqz8 Requirements Conditions of Employment U.S. Citizenship Required This is a Drug Testing position. Background investigation leading to a clearance is required for new hires. This position requires signing a Mobility Agreement. Qualification as an NRC inspector is expected within two years. Security Clearance Level Required is "LH." Selectees are required to serve a trial period to assess their overall fitness and qualifications for continued employment. The trial period for new employees is two years. New employees who are preference eligible veterans serve a one-year trial period. Geographic mobility is a condition of employment for selection under this announcement and selectee must sign a Mobility Agreement. The Mobility Agreement will be furnished to selectee at the point of job offer and must be signed at the time the offer is accepted. NOTE THAT THE TOUR LENGTH FOR A RESIDENT INSPECTOR AT A SINGLE SITE IS LIMITED TO SEVEN (7) YEARS BY COMMISSION POLICY. Resident Office Locations and Relocation Incentives: Provided the employee meets all relocation incentive eligibility requirements, at the time of a subsequent qualifying move to/between/from Resident Inspector positions, the employee may be eligible for a relocation incentive. The relocation incentive is a one-time payment in the amount of the employee's total pay, including special salary rate and applicable locality adjustment for the grade and step held at the time of the qualifying assignment, multiplied by 15%, 20% or 30%, dependent upon the location of the resident site. For a complete list of NRC resident office locations at the power reactor units regulated by the NRC, and their regional designation, please refer to this link: Operating Power Reactor Units Qualifications In addition to meeting the basic education requirements for professional engineering positions, as described above in the Education section, to qualify for this position at the advertised grade levels, you must meet the following: For GG-11: Generally, two to three years of post bachelor's degree specialized experience, at least, one of which is equivalent to the GG-9 level OR 3 years of progressively higher level graduate education leading to a Ph.D degree OR a Ph.D OR equivalent doctoral degree in the degree fields as described. Combinations of education and experience may be acceptable. For GG-12: Generally, four years of post bachelor's degree specialized experience or at least 2 years of post master's degree professional engineering experience, one year of which is equivalent to the GG-11 level, where you have applied relevant professional engineering disciplines; e.g. nuclear, electrical, mechanical, metallurgical, structural, chemical. For GG-13: Generally, five+ years of post bachelor's degree specialized experience or at least 3+ years of post master's degree professional engineering experience, one year of which is equivalent to the GG-12 level, where you applied relevant professional engineering disciplines as identified above. SPECIALIZED EXPERIENCE is defined as experience that demonstrates a thorough knowledge of the principles, theories, and practices in the field of engineering. You must also have recent experience associated with applying any of a variety of relevant professional engineering disciplines (e.g., nuclear, electrical, mechanical, metallurgical, structural, chemical). Recent experience in the industry of commercial, government or military nuclear power is preferred. You must also be familiar with nuclear industry standards, rules and regulations and be able to apply them. The ideal candidate will be able to demonstrate the following: (1) Knowledge of the design features and operating characteristics of nuclear facilities by describing professional experience with reactor facilities, commercial, government, or military. This experience may have been as a power plant operator, in a staff position in operations, or associated with plant operations. (2) Demonstrated ability to evaluate activities and events, develop inspection findings, and evaluate adequacy of corrective actions. (3) Demonstrated ability to develop and implement successful approaches to problem solving and conflict resolution. (4) Demonstrated ability to communicate well, both orally and in writing. A description of how you possess the specialized experience as well as how you meet the qualifications desired in an ideal candidate should be addressed in your resume. The NRC encourages applicants to provide extensive job experience details in your resume. Applicants may also use the supplemental vacancy question to provide additional information pertaining to specialized experience and ideal candidate criteria. Education To qualify for these positions, you must meet BOTH basic education/professional knowledge requirements that apply to Federal engineering positions at all grade levels AND the specialized experience requirements outlined above no later than 30 calendar days after the closing date of this announcement and before placement in the position. Regardless of the grade level of the vacancy, candidates for Federal Government professional engineering positions must meet certain basic professional knowledge requirements. Generally, these knowledge requirements are met by having a bachelor's or higher degree in a relevant professional engineering discipline (e.g., nuclear, electrical, mechanical, metallurgical, structural, chemical) from a school of engineering with at least one professional engineering curriculum accredited by the Accreditation Board for Engineering and Technology (ABET). If you do not possess such a professional engineering degree, you may still satisfy the professional knowledge requirements if you have current Professional Engineer (P.E.) registration in one of the relevant disciplines from any U.S. State or Territory; or if you successfully passed an Engineer-in-Training (EIT) written examination administered by a State Board of Engineering Examiners; or if you have either a related professional degree or at least 60 semester hours of specified engineering-related college courses combined with at least a year of professional engineering work experience performed under professional engineer supervision and guidance. NOTE: Engineering technology degrees are not generally qualifying unless supplemented by other evidence of the individual's professional knowledge (e.g., current P.E. licensure or EIT examination results, as discussed above). More detailed information about these alternatives for meeting the knowledge requirements for Federal professional engineering jobs are described in the U.S. Office of Personnel Management qualification Standards Operating Manual which may be accessed at the following website: 800 Professional Engineering Occupational Requirements You must include an unofficial copy of your college and/or university transcripts with your application. Additional Information The duty locations of these positions are King of Prussia, PA, Atlanta, GA, Lisle, IL or Arlington, TX. In general, employees are expected to be in the office 4 days per pay period. Telework schedules are approved, on a case-by-case basis. If selected, telework will be determined in accordance with Agency policy and the Collective Bargaining Agreement, if applicable. Based on the staffing needs of the agency/area of consideration, additional selections may be made from this vacancy announcement. Individuals who are eligible for non-competitive appointment under an OPM special appointing authority may apply for consideration under a comparable NRC non-competitive appointing authority. Veterans, please visit: FedsHireVets The NRC provides reasonable accommodation to applicants with disabilities where appropriate. If you need a reasonable accommodation for any part of the application and hiring process, please notify the coordinator at (301) 287-0745 or TDD 240-482-3217. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Selectee's will be required to complete a "Declaration of Federal Employment", (OF-306), prior to being appointed to determine their suitability for Federal employment and to authorize a background investigation. False statements or responses on your resume or questionnaire can jeopardize your employment opportunity and subject you to disciplinary action, including removal from Federal service. The NRC is a zero-tolerance agency with respect to illegal drug use. Individuals selected for these positions will be subject to pre-appointment drug testing. A transferable security clearance from another agency or a background investigation leading to a clearance is required for all new hires. To begin work at the NRC without a security clearance, you must be granted a temporary waiver of the required clearance, referred to as a 145(b) waiver. To be eligible for a 145(b) waiver you will need a favorable education verification, reference, credit, and criminal history checks. If a wavier is granted, the successful completion of a background investigation and favorable adjudication is required for continued employment. If you have resided outside the U.S. for an extended period of time, the agency may not be able to (1) grant the 145(b) waiver where the required investigation cannot be completed in a timely manner, or (2) achieve timely completion of the background investigation required for a security clearance.