AMVETS Jobs

KEY RESPONSIBILITIES / DUTIES主要职责:

· Under supervision, he supports the Engineering team for product transfers, process development and optimization. Always with the goal to achieve high quality, most efficient and cost optimized processes. 在监督下,他支持的工程团队产品转移,过程开发和优化。总是目标都能达到高质量,最有效和成本优化的过程。

· Continuously fully comply will all GMP standard requirements. 不断完全遵守GMP标准的要求。

· Participate in project team meetings as process representative. 参与项目团队会议进程的代表。 · Will set up and perform new products/equipment/tooling validation or qualifications. 推动持续改进质量和生产效率。

· Drive for continuous improvement in quality and production efficiency. 追求在质量和效率方面持续改善 · Will extract and process test data/findings into both formal and written and verbal reports which comply with all engineering and regulatory standards. 将提取和过程测试数据/结果到正式和书面和口头

· Process problems, NCR investigation, corrective action plan and execution. 过程问题,NCR调查、纠正性行动计划和执行。 将被要求遵守的文档过程。

· Will be required to comply with documentation procedures. 将建立和执行新产品/设备/工具验证或资格。 · Will work from engineering schematics or blueprints to perform accurate checks and tests. 将工作从工程图表或蓝图进行准确的检查和测试。

· May interact with vendors to resolve repair, inspection and/or quote components and/or equipment. 可能与供应商解决修理、检查和/或引用的组件和/或设备

· Will work from written and/or verbal instructions. 有很好的读写能力

· May train others on technical processes or procedures. 能培训技术流程

· Under supervision, assist Engineers in providing basic design, technical and operational support to manufacturing processes in connection to the Quality System Improvement Plan 在监督下，助理工程师提供基本设计，技术和操作等支持制造流程 · Ensure quality of process and product as defined in appropriate OS and Material specifications 确保质量工艺和产品被合适的定义在操作系统和原材料的规格中

· Participate in FMEA and PPAP activities associated with product transfers and launches 参与FMEA 和 PPAP 活动，协助产品转移和投产

· Under supervision, support capital acquisition activity from specifying equipment, contract negotiation, Installation and validation 在监督下，支持固定资产的投资，设备选型，合同谈判，安装验证 · Train manufacturing team members 培训制造团队

· Interface with Materials Science, Design and Quality Assurance departments to provide customer with a quality product in a timely manner 配合材料技术，设计，质量保证部门及时给客户提供高质量产品

· Supports Engineers in the Validation, Appraisal and support of process and material suppliers as required. 支持工程师验证、评价和按照要求支持的过程和材料供应商。

· Communicate and participate in system and process troubleshooting with support team members and with external agents 支持团队及外部代理商，沟通和参与系统及工艺问题解决

· Participate in cross-functional and cross divisional process improvement initiatives 参加跨职能跨部门的工艺改善活动

· Provision of out-of-hours support to the business as required by management or as mandated by shutdowns and/or equipment failures 提供正常工作之外的支持业务需要，停线或机床停机

· Create / adjust work instructions in area of responsibility 新建和调试作业指导书

· Lead / support of projects of limited scope 领导和支持一定范围的项目

· All other duties as assigned 执行其他被安排的任务

REQUIRED SKILL / SET岗位技能：

· Must be able to analyze and resolve non-routine testing and/or equipment issues using independent judgment. 必须能够分析和解决非常规测试和/或设备问题使用独立的判断。

· Must be able to observe and note minute inconsistencies. 必须能够观察和注意不一致性。

· Must be able to complete detailed documentation accurately. 必须能够准确完整的详细文档。

· Must be able to prioritize work effectively. 必须能够有效地优先考虑的工作。

· Must be able to complete detailed documentation accurately.

· 必须能够准确完整的详细文档。

· Reading, writing, math, and measuring skills. · 阅读、写作、数学、和测量能力。

· Blueprint/engineering schematic reading and interpretations. · 蓝图/工程示意图阅读和解释。

· Intermediate PC and appropriate application skills. 中间PC和适当的应用技能。

· Demonstrated ability to operate small hand tools (e.g. pliers, screwdrivers, wrenches, hammer, etc.), and common test equipment (e.g., micrometer, peel tested, data loggers, etc.). 展示了运营能力小的手工具(如钳子、螺丝刀、扳手、锤子等),和通用测试设备(如。测微计,皮测试,数据记录器,等等)。

· Excellent problem solving skills. 优秀的解决问题的能力。

· Strong communication skills with both internal and external stakeholders. 较强的内部外部沟通能力

· Solving skills and ability to handle multiple tasks in a fast paced environment 具有在快节奏的工作环境中解决问题的能力及处理多项工作的能力

· Fosters a working environment of continuous improvement 促进持续改进的工作环境

· Capable of training manufacturing team members 有能力培训制造团队

RELEVANT EXPERIENCE / 经验要求：

· 1-3 years engineering experience preferred · １～３年工程技术工作经验优先， · Experience in CNC or other manufacturing processes. 有CNC及机械加工经验

· Experience in developing and working with small group problem solving teams. · 有领导团队解决问题的经验

· Experience on process development. Experience medical device industry is preferred. · 有工艺开发经验，医疗行业优先

· Experience on process quality. · 有质量过程管控经验

Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology, Orthopaedics and Spine that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 150 million patients annually.

Stryker Corporation is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status. Stryker is an EO employer – M/F/Veteran/Disability.